One of the best things about Epilog's laser engraving/cutting systems is that, in addition to customizing ready-made products, operators can also use this versatile tool to cut and create one-of-a-kind objects from scratch - often times using scrap material! In this sample club we're providing different files as inspiration to create your own custom awards from a all kinds of substrates.
These award designs are fully customizeable and can work on a variety of materials. Use your imagination and modify as you like to bolster your award sample selection!
Vi brukte en Fusion M2 32 på 75-watt med følgende innstillinger for fargekart:
Acrylic Cutting: Vector | Speed 1% | Power 100%
Wood Engraving: Raster | Speed 40% | Power 100% | DPI 600 | Standard
Open the file and arrange the graphics to the size of your material. Adjust the print settings according to the material and send artwork to the laser.
Insert the material into the system and move to the upper left corner of the table. Next, run the vector outline (remember to have the red dot pointer on and leave the lid open) to ensure your placement is where you want. Once you're satisfied, send the job to the laser and press go!
Apply acrylic cement or mix media glue to hold your pieces together. Use a clamp to help the materials set in the correct position.