Incorporate your personal style into any occasion with these sleek faux-wood chargers. Designed with Thanksgiving in mind, we masked the charger, engraved our Thanksgiving message and then color-filled the design.
Whether you use our design or your own original artwork, these charming custom chargers will be a welcome addition to any gathering. Read on to learn how we did it!
We used a 75-watt Fusion M2 with the following Color Map settings:
Speed: 100% // Power: 70%
Click the "Download Now" button above. This will open a zipped folder that includes the artwork files. Adjust the print settings according to you laser's wattage and choose Center-Center Engraving.
Apply the masking tape to the charger plate. This will allow for a clean and precise color-fill once the charger is engraved.
Locate the center of the charger plate and set it as the Home Position.
Print the file using Center-Center Engraving. Press Go!
Smooth out any edges that may have come loose during the engraving process.
Apply a small amount of spray paint in multiple coats to avoid bleeding. Once dried, remove the mask
Have fun experimenting with the color-fill process. You'll quickly learn how fast and easy it is to take your engraving projects to the next level with this popular technique.
Vi sender deg en brosjyre og graverte og kuttede vareprøver som ble lagt med laseren.
Gå til vår fullstendige prøveklubb for flere ideer om hva du kan skape med et lasersystem fra Epilog.
Se det fullstendige utvalget av Co2- og fiberlasere for gravering og kutting for å finne den som er best for deg.
2019 © Epilog Laser. Med enerett. Personvern | Finn distributører | Nettstedkart
