Fusion Edge Laser Machines

Software/Firmware for Fusion Edge Laser Systems

Fusion Edge

Firmware & Driver Downloads

Registrer deg for å melding via e-post når det er en ny tilgjengelig driver eller fastvare for lasermodellen din.

Registrer deg nå

Epilog Software Suite 2.2.9.0 (8/27/2021)

  • Alt du trenger for å kjøre ditt Fusion Edge-system
  • Installerer Epilog Job Manager og Epilog Laser Dashboard

Versjon 2.2.9.0 Versjonsnotater

  • Adding new engravers to the Job Manager is more intuitive
  • Feilrettinger og forbedringer

- For more information on the Job Manager, click here.
- Download Software Suite install and use instructions.
- For information on how to use the Construction Lines feature, click here

Vennligst merk: Fjern forrige versjon av Epilog Job Manager og Epilog Software Suite for installasjon!(Gå til Kontrollpanel > Programmer og funksjoner, og fjern programvaren.)

Last ned 64-bits (x64) versjon Last ned 32-bits (x86) versjon

Minimumskrav:

  • Windows 7, Windows 8.1 eller Windows 10
  • Operativsystem bør ha alle systemoppdateringer før installasjon
  • Støtter OpenGL 3.0 (eller høyere) eller OpenGL 2.0ES (eller høyere)
  • 4 GB RAM eller mer
  • 2 prosessorkjerner eller mer
  • Prosessoren kan være en hvilken som helst Intel i3/i5/i7, AMD Ryzen 3/5/7, AMD A4/A6/A8/A10/A12/FX
  • Integrert gigabit ethernet kreves for Fusion M2 vision-system. Fusion Pro / Edge har ikke samme krav, men er greit å ha.

Anbefalte spesifikasjoner:

  • 8 GB RAM eller mer
  • 4 prosessorkjerner eller mer
  • Prosessor kan være en hvilken som helst Intel i5/i7, AMD Ryzen 5/7, AMD A6/A8/A10/A12/FX

1.0.4.2 Firmware Downloads


1.0.4.2 (.SWU)
1.0.4.2 (.ZIP)

Fastvare: 1.0.4.2 (9/9/2021)

Vennligst merk: After upgrading the Fusion Edge to 1.0.4.2, you cannot downgrade to a version below 1.0.4.0.

Last ned fastvare 1.0.4.2 Last ned fastvare 1.0.4.2 (.zip)


Les installasjonsinstruksjoner

NEW FEATURES/ENHANCEMENTS

  1. Table can now be nudged when the machine is running. (New as of 1.0.3.6)
  2. Improved engraving quality of the Rotary Attachment. (New as of 1.0.3.6)
  3. Enabled the following features on the Fusion Pro 24/36: (New as of 1.0.3.6)
    • WiFi Capabilities
    • Job thumbnails at machine (requires newest Software Suite)
    • Edit job settings at the machine
    • Adjusted the Rotary Attachment’s park position for easier loading and unloading
  4. Enabled the following features on the Fusion Pro 24/36: (New as of 1.0.4.1)
    • Stack (Processing) Light
    • Ability to control the Air Assist from the Software Suite
    • Carriage camera for registration
  5. Improved vector speed and power compensation. (New as of 1.0.3.6)
  6. Power and Frequency can be modified while the job is running, dependent on job and laser type. (New as of 1.0.4.1)
  7. Added dynamic raster ramps for improved raster speeds and the ability to disable this feature in the settings menu. (New as of 1.0.4.1)

BUG FIXES:

Miscellaneous bug fixes and enhancements

FIRMWARE FAQ'S:

  • How do I know what firmware version I have?
    • If you have older firmware, you can determine your firmware version under Settings (gear icon) > Version on the control panel. If your firmware version is newer, it will be listed at the bottom of the settings menu.
  • How often will I receive firmware updates?
    • If you have signed up for firmware updates, we only send new versions to customers when there are feature updates or large bug fixes. Incremental changes are only released to new production machines, and don't need to be updated in your machine if you are not experiencing issues.
Portions of this page translated by Google.